Specifi cations – Casio IT-800 User Manual

Page 60

E-59

Important !

Never short out the contacts of the Ethernet Cradle. This can damage the

Ethernet Cradle.
Allowing the power contacts become wet can cause an electric shock or fi re. In
addition, if the contacts become soiled, contact may be impaired resulting in
poor charging. For reasons of safety and maintaining charging battery pack(s)
in optimum condition, clean the power contacts by wiping with a dry cloth or
cotton swab after disconnecting the AC adaptor.
Do not subject the Handheld Terminal and Ethernet Cradle to vibration or

impact during communication. This can cause communication to be interrupted.
When placing the IT-800 into the cradle, make sure that it is seated properly and

that the power LED at the front of the Ethernet Cradle is lit in green. Charging

and communication will not proceed properly if the Handheld Terminal is not

seated properly.
Always cap ports that are not being used. Using the Ethernet Cradle while the

ports are uncapped can cause damage.

Specifi cations

1. LAN Specifi cations

Communications protocol: IEEE 802.3
Media type:

10base-T/100base-TX auto-switched

2. USB

Protocol: USB

Ver1.1

Standard

Transmission Rate:

12Mbps (max.)

3. Charging

Charging Method:

Constant current/voltage (the charging circuit is built in IT-800)

Charge Period:

Approximately 4 hours (battery pack)

Approximately 7 hours (large-capacity battery pack)

4. Power Supply

Power Source:

AC adaptor (AD-S42120C-N5/AD-S42120B)

Consumption Current:

12V DC approximately 3.0A

Output to Handheld Terminal: 5V DC 3.0A (max.)
USB Host Output:

5V DC 0.5A (max.)

5. AC Adaptor

Model: AD-S42120C-N5/AD-S42120B
Input:

100V to 240V AC 50/60Hz 1.2A

Output:

12V DC 3.5A

6. Dimensions and Weight

Dimensions:

Approximately 116(W)

× 111.5(D) × 83.5(H) mm

⁄

× 4

⁄

× 3

⁄

"H)

Weight:

Approximately 280g (9.9oz)

7. Operating Environment

Temperature:

0°C to 40°C (32°F to 104°F)

Humidity:

10% to 90% RH (non-condensation)

•