Casio DT-X30 - Manual (Page 52)

E-50
Using the Car Mounted-type Battery Charger (HA-G35CHG)
The optionally available Car Mounted-type Battery Charger (HA-G35CHG) can be
used to charge the battery installed in the Handheld Terminal using power from the
cigarette lighter in your car.
General Guide
Top
4
Left
2
Front
2 2
3
5
Back
1
2
1 AC Adaptor Jack Connect the Car Power Cable (bundled) here.
2 Removal Buttons Press when removing the DT-X30.
3 Terminal Detect
Switch This switch detects when the DT-X30 is mounted correctly on the
charger.
4 Power Contacts Power is supplied to the DT-X30 via these contacts.
5 Power LED This LED indicates the power status and the mountting status of
the DT-X30.
Off: DT-X30 is not installed
Green: Power on, DT-X30 mounted correctly