Casio DT-X30 - Manual (Page 23)

E-21
Charging the Battery Pack
To charge the battery pack, use one of the cradles and the battery chargers following
the procedure described below. Be sure to use the separately sold AC adaptor (AD-
S42120B-N) to power the cradle or charger.
Or, if you use the Car Mounted-type Battery Charger in a vehicle, use the accompanied
Car Power Cable to power the charger.
USB Cradle/Ethernet Cradle/Cradle-type Battery Charger
The power LED on the front of the Cradle will light green if the Handheld Terminal has
been properly mounted.
Status of Indicator 1 on DT-X30:
Orange: Charging
Red:
Standby due to battery pack error or the surrounding temperature is out of the
charging temperature range
(charging begins when the temperature is within the charging temperature range)
Green: Charging complete
Dual Battery Charger
Taking care that the battery pack is oriented correctly, insert it into the Dual Battery
Charger.
This causes the Charge Indicator LED to light in red, indicating that charging has
started.
Status of Charge Indicator LED
Off: Not charging
Red: Charging