Casio EX-MR1 - Manual (Page 91)

91
Other Settings (Set Up)
IMPORTANT!
• Before configuring World Time settings, make sure that the Home City setting is
the place where you live or normally use the camera. If it isn’t, select “Home” on the
screen in step 1 and configure the Home City, date, and time settings as required
(page 92).
Procedure
[MENU] * “Set Up” Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
Example: July, 10, 2016, 1:25 p.m.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using the DPOF function or some printing application (page 77).
Time Stamping Snapshots (Timestamp)
Date 2016/7/10
Date & Time 2016/7/10 1:25pm
Off No stamping of date and/or time