Casio EX-MR1 - Manual (Page 17)

17
Quick Start Basics
To replace the battery
1.
Open the battery cover and
remove the current battery.
2.
Load a new battery.
You can use either of the two following methods to charge the camera’s battery.
• USB-AC adaptor
• USB connection to a computer
.
To charge with the USB-AC adaptor
The adaptor lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below.
Charging time: Approximately 150 minutes
• When disconnecting the USB-AC adaptor from the camera, be sure to disconnect
from the camera first.
Charge the Battery
Stopper
1
3
2
4
Micro USB cable
(included with camera)
u
mark of the small (micro USB)
connector facing the mirror side.
[USB] port
USB-AC adaptor
(AD-C53U)
Power cord