Elation Professional LED 12 Brick II - Manual (Page 21)

Design LED 12 Brick II ™
©Elation Professional, Los Angeles Ca. 20 www.ElationLighting.com
FADE XXX Adjust speed of fade
STRB XXX Adjust speed of strobe
SPED XXX Adjust speed of scene
FADE XXX Adjust speed of fade CHS7
STRB XXX Adjust speed of fade
SPED XXX Adjust speed of scene
FADE XXX Adjust speed of fade CHS8
STRB XXX Adjust speed of fade
MAST Sound-controlled run as Master CTRL
ALON Sound-controlled run in Stand Alone
SOND
MIC M-XX Microphone sensitivity
MOD1 Select standard dimmer
MOD2 Select weak dimmer
yes
Reset to Fixture to the Factory Default
Settings
OTHR
V X.X Show the version
Remark:
1) If there is no DMX data received in the device, the display will flash.
2) Instruction for the SPED and the FADE function in CHAS:
SPEED: The time one step would stay
FADE: The time that one step altered to next step
Example: we set SPEED ==1second, and FADE ==1second, the 1st step is Red 100% open,
the 2nd step is green 100% open, the 3rd step is Blue 100% open. So, the Chase would
come out as:
1, The Red 100% open and stay for 1second (SPEED)
2, Then Red drop down from 100% to 0%, the same time Green from 0% to 100%, in
1second (FADE)
3, The Green stay 100% for 1second
4, Then Green drop down from 100% to 0%, the same time Blue from 0% to 100%, in
1second (FADE)
5, Blue stay 100% for 1 second.
6, Then Blue drop down from 100% to 0%, the Red come up from 0% to 100%
Repetition operation