Ericsson 4187 Plus - Manual (Page 93)

93 Dialog 4187 Plus
Installation
Installation
Install cables
You can put the cable to the handset into the notch underneath the
telephone. Install the cables into the correct outlets, i.e.:
•
Cable to the telephone system is plugged into “LINE”
• Handset cable is plugged into “HANDSET”
• Headset cable is plugged into “HEADSET”
• Modem or PC is plugged into “DATA PORT”
Note: For headset servicing and replacement, contact your
local service centre or retailer shop.
To change cables:
Use a screwdriver to unlock the stop, and remove the cable.
Handset cable to the left Handset cable to the right