Ericsson 4187 Plus - Manual (Page 29)

29 Dialog 4187 Plus
Outgoing Calls
Dial by a function key
You can program and activate directory numbers (extensions and
Common Speed Dialing numbers) on the programmable keys.
It is possible to store up to 20 numbers (two numbers/key) and the
number can consist of maximum 24 digits. See section “ Set the
number of programmable keys ” on page 84. u
Lift the handset.
Wait for dial tone.
Head Office
î
Press to make a call (preprogrammed).
Note: To dial a number that is stored on the second level,
press the preprogrammed key twice.
Program
Notes:
Make sure that the programming slide switch is set to the
“Prog On” position. See section “ Enable/Disable function
key programming ” on page 90.
The Message Waiting key is treated as a normal
programmable key.
Program a directory number on the programmable keys: ²
Press.
The key lamp is flashing during programming. î
Press a programmable key.
Note: To store a number on the second level, press the
programmable key twice.
If a number is already stored, it is displayed (example):
z
Dial the number.
You can use any directory number, e.g. a Common Abbreviated
Number or a colleague’s extension number. You can also store a
pause (multiple pauses possible), the R-key feature or any
procedure that contains
*
or
#
.
DIAL-BY-NAME KEY
0-00460812345678