Ericsson 4187 Plus - Manual (Page 35)

35 Dialog 4187 Plus
Call List
Call List
The Call List stores all incoming and outgoing calls. A received call
which has been called back is considered as an outgoing call.
The Call List can store a maximum of 50 positions (name and
number). The Call Timer record for each position is also stored.
Stored positions can consist of maximum 24 digits.
Note: A number will only occur once in the Call List, that is
the last time it was dialed or received.
Incoming and outgoing calls are displayed differently (see below).
Incoming call:
• 7436 is the calling number (name and number are displayed
alternately).
• P01 means that the number is stored at the first position.
• N02 where N means that the call is new and not viewed
and 02 means that the same caller called twice.
• 01-15 10:38 is the date and time of the call.
Outgoing call:
• P02 means that the number is stored at the second position.
• 00:02:15 is the duration of the call.
• 7436 is the called number.
7436
P01 N02 01-15 10:38
P02 00:02:15
7436