EMI CAC User Manual
Page 8
www.enviromaster.com
CAC Cassette Evaporator
8
Fold
bracket along
perforations
2. Install hanger bolts using 3/8 all thread
rod at the centers shown in Figure #2.
3. Prepare the installation guides by fold-
ing the metal bracket by hand along
the perforations.
INNER CASE
INSULATION
CASSETTE
CASE
Figure #3
5. Secure unit in position with locknuts and
washers on either side of the Cassette
bracket.
6. Ensure threaded rod does not pro-
trude more than 2” below the mounting
bracket.
2” MAX
NOTE: If the ceiling is not level or
even, it is important that the Cas-
sette is installed level to ensure cor-
rect pump operation and to maintain
fan clearances. Place a carpenter’s
level on the unit. A maximum slope
of 1/8” toward the condensate drain
is allowed. Any slight discrepancy
between the Cassette and ceiling will
be taken up by the fascia foam seal.
4. Lift the Cassette onto the hanging rods.
Leveled at the correct distance from
the ceiling with the aid of the installa-
tion guides as shown Figure #3.
CAC CASSETTE CHASSIS POSITIONING AND INSTALLATION