Setting up barometric pressure and weather trend – Auriol Z31163 User Manual

Page 60

60 GB/MT

Press any button except for the SNOOZE- / LIGHT button to stop the

alarm signal until the next day. It is not necessary to reactivate the alarm.
It switches itself automatically to the alarm time which has already
been set.

Setting up barometric pressure

and weather trend

The display indicates the absolute current barometric pressure

and the

barometric pressure trend

by means of an arrow:

Note: After preparing for use, the geographic altitude must be communi-
cated to the device, to enable an approximate weather trend based on the
barometric pressure.

For this, it is imperative that you set the current weather. To do so,

proceed as follows:

1. Press and hold the WEATHER / UNIT button

until a signal sounds

and the current weather display blinks. Press the ▲ °C / °F

and ▼

ALARM ON / OFF buttons

to set the current weather.

2. Then confirm your selection of the current weather display by pressing

the WEATHER / UNIT button.