Epson LT - 286e - Manual (Page 7)

Starting the Diagnostics Program
To start the diagnostics program, follow these steps:
1. Insert the Diagnostics diskette in drive A.
2. Turn on or reset the computer.
3. At the MS-DOS@ prompt, type the following and press
Enter:
D I A G
The Diagnostics program displays a title screen.
4. Press any key to continue.
Creating a Database
You can create a database to record the location of faulty
memory chips that are causing memory errors. To graphically
represent the memory board on the screen, you need to identify
your system’s memory configuration.
In the lower portion of the screen, you see this message:
P r e s s < E s c > t o b y p a s s d a t a b a s e c r e a t i o n
Press E SC
if you do not want to create the database. The DIAG
main menu appears so you can select the tests you want to run.
2
System
Diagnostics