Curtis LT8025 - Manual (Page 7)

7
shortcut bar, and select settings for the voice and display mode. Then select the
check box behind the “Haptic feedback” and the vibration function is disabled.
2.7 Turning interface
The interface can be turned at times when the direction of the device changes.
When you hold the device in a vertical way, the interface will show the contents in
a vertical way too. When horizontal, the interface stands horizontal too. The screen
can turn within two seconds and restore the previous state after refreshing.
2.8 External network cable and flash disk
External network cable
Connect an adapter box to the flat handheld PC and insert the network cable into
the port of Ethernet. Once logged in, the system will automatically obtain an IP
address for network access. Network access can also be realized through manual
setups.
External flash disk:
Connect an adapter box to the flat handheld PC and insert the flash disk into the
USB port. Once it is properly connected, you can save and copy contents between
the device and the PC.
2.9 Network connection
Cable network:
After you insert the network cable into the port designed for Ethernet on the adapter
box connected to the PC, the icon “ETH” will appear on status bar at the top of the