Curtis LT8025 - Manual (Page 5)

5
memory then they need to save it first onto an sd card and then it can be saved to
the local memory.
2.3 Hot plug of SD card and external flash disk
Do not hot plug the SD card and external flash disk when they are being used or
their contents are browsed. If, in such software as My Video, My Music and My
Photo, the files in the SD card and external flash disk are being used or browsed,
and the card or the disk is pulled out directly, it may damage them, and the program
may exits for self protection. For details of plugging and unplugging the card,
please refer to the part “2.2--Using the SD card”. Before you remove the external
flash disk, you must close all its files being used.
2.4 Memory space
The device has three memory spaces: Internal memory, flash disk and SD card. The
internal memory of the device won’t be displayed. The folders of SD card are
displayed as “SD card 1” and “SD card 2”. The folders of external flash disk are
displayed as “SD 1” and “SD 2”. The system memory can only be used for storing
the system files, with a capacity of 2GB. The capacity of the SD card and the
external flash disk is subject to the device itself. The system can support an SD card
of 32GB at maximum.
For details of the memory, please refer to the part “8.6—SD card and device’s
memory”
2.5 Power-on/off