Curtis LT8025 - Manual (Page 6)

6
1. Power on: When the battery can provide sufficient power, you can press the key
Power and hold on for two seconds to power on the device. At the time, the device
may vibrate. After the power-on process, the system will enter the screen-locking
interface. You can slide rightward the unlocking icon to enter the main interface.
2. Power off: First press and hold the key Power for 4 seconds, and the system will
pop up the interface for power-off confirmation. You can click the red icon at the
right and power off the device, or click the key Cancel at the lower right corner to
cancel the operation. In the latter case, the system will return to the Power-Off
interface.
3. Sleeping mode: Press the power switch for one second, and the system will enter
the sleeping mode, in which the LCD screen will turn black. In this mode, you can
press any key to wake up the system. Once waken up, the system enters the
screen-locking interface. To save energy, if the electricity is insufficient in the
sleeping mode, the system can power off itself after it is automatically powered on.
2.6 Vibration
Power-on vibration: Click the setup icon the shortcut bar, and select
settings for the voice and display mode. Then select the check box behind the
“Haptic feedback” and the vibration function is enabled.
Power-off vibration: In vibration mode, you can click the icon on the