Emerson MAYA ZEN CF750ORB00 - Manual (Page 3)

3
This Manual is Designed to Make it as Easy as Possible for You to
Assemble, Install, Operate and Maintain Your Ceiling Fan
Do not install or use fan if any part is
damaged or missing. Call Toll-Free:
1-800-654-3545
! WARNING
This product is designed to use only
those parts supplied with this product
and/or any accessories designated
specifically for use with this product by
Emerson Electric Co. Substitution of
parts or accessories not designated for
use with this product by Emerson Electric
Co. could result in personal injury or
property damage.
! WARNING
Tools Needed for Assembly
One Phillips head screwdriver
One wire stripper
One stepladder
Four 7-watt (maximum) candelabra
base bulbs (upper light)
Three 60-watt (maximum) candelabra
base bulbs (lower light)
Materials
Wiring, outlet box and box connectors
must be of type required by the local code.
The minimum wire would be a 3-conductor
(2-wire with ground) of the following sizes:
Installed Wire Length Wire Size A.W.G.
Up to 50 ft. 14
50-100 ft. 12
Before assembling your ceiling fan, refer
to section on proper method of wiring
your fan (Page 10). If you feel you do not
have enough wiring knowledge or
experience, have your fan installed by a
licensed electrician.
! WARNING
Unpacking Instructions
For your convenience, check-off boxes are provided next to each step. As each
step is completed, place a check mark in the box. This will insure that all steps
have been completed and will be helpful in finding your place should you be
interrupted.
NOTE: If you are uncertain of part
description, refer to exploded view
illustration.
a. One Fan motor assembly
b. One coupling cover
c. One ceiling cover
d. One upper decorative scroll
e. Five blade flanges
f. Five fan blades
g. One light kit plate assembly
h. One lower glass
i. One hanger ball/8” downrod assembly
j. One hanger bracket
k. One 4.5” downrod
l. One fan/light wall control
(transmitter)
m. One SW105 receiver
n. One loose parts bag containing:
1. One clevis pin
2. One hairpin clip
3. Three 12 ga. wire connectors
4. Two #8-32 x 1-1/4” threaded studs
5. Two #8 external tooth lockwashers
6. Two #8-32 knurled knobs
7. Sixteen M5 x 6mm washer head
screws
8. Eleven M5 x 12mm pan head
screws
9. Eleven M5 lockwashers
10. Four M4 x 10mm serrated head
screws
11. One balancing kit
1. Open carton containing fan. Remove
top half of styrofoam unit. Remove
parts and check to see that you have
received the following parts:
BP7333 CF750 MAYA ZEN 12/22/06 7:59 AM Page 3