Emerson Radio ES920 - Manual (Page 35)

34
To Reactivate The Timer
1.) Press the MODE button repeatedly until
the “ ON” indicator is flashing in the
display.
2.) Press the TIMER button.
The “ON” indicator stops flashing and
remains ‘On’, but the “ ” indicator
continues flashing.
This indicates that the Timer On time is active.
3.) Press the MODE button repeatedly until
the “ OFF” indicator is flashing in the
display.
4.) Press the TIMER button.
The “OFF” indicator stops flashing and
remains ‘On’, but the “ ” indicator
continues flashing.
This indicates that the Timer Off time is active.
Press MODE button once more to return to current time.
At the selected ‘On’ time the system will turn on automatically to the last function
selected, either TUNER or CD. It will play until it reaches the selected ‘Off’ time
and then shut off automatically.
Note: If the system turns on to CD function it will only play until the end of the disc
and then stop. If you programmed the system to turn on and play for 3 hours
before shutting off, but your CD is only 45 minutes, the system will only play for 45
minutes but the power will remain On for another 2 hours and 15 minutes before
shutting Off automatically.
ES920_102104.p65 21/10/2004, 12:06 34