Emerson Radio ES920 - Manual (Page 24)

23
Recalling Preset Stations
1.) Turn the system ‘On’, press the TUNER/BAND button to select the Tuner
function and the desired band.
2.) Press the PRESET/ button repeatedly until the desired preset number and
frequency appears on the display.
• You may also use the number buttons on the remote control to directly select
the desired preset memory number.
• Simply press the corresponding number key on the remote handset to select
preset memory numbers 1 through 9.
• To select preset memory numbers 10 through 19, first press the “+10” button
and then the desired second digit.
For example:
To select preset 10, press the “+10” button once and then the “0” button.
To select preset 19, press the “+10” button once and then the “9” button.
To select preset 20, press the “+10” button twice and then the “0” button.
Changing Preset Stations
1.) Tune to the new station you want to memorize.
2.) Press the MEMORY button to start the dashes “– –” flashing.
3.) Repeatedly press PRESET/ button to select the preset memory number you
wish change.
4.) Press the MEMORY button again. The new station is entered in the memory
and the previous station is deleted.
ES920_102104.p65 21/10/2004, 12:06 23