Emerson Radio ES920 - Manual (Page 32)

31
Special Functions
Timer Operation
This system includes a programmable On/Off timer function. You can use the
timer to wake you up to the radio or to your favorite CD. The timer can be
programmed while the system is in the Standby (Power Off) mode, the Aux mode,
the Tuner mode or the CD mode.
To Set The ‘ON’ Time
1.) Press the MODE button on the front panel
or the remote control repeatedly until the
“ ON” indicator is flashing in the display.
2.) Press the MEMORY button on the front
panel or remote control.
The Hour digits begin flashing.
3.) Press the or buttons to set the display to the desired turn on hour, , AM
or PM.
4.) Press the MEMORY button on the front
panel or remote control to memorize the
’On’ hour setting.
The Minute digits begin flashing.
5.) Press the or button to set the
display to the desired turn on minute.
Press MEMORY button once again to
memorize the ‘On’ minute setting.
Only the “ ” indicator continues flashing.
ES920_102104.p65 21/10/2004, 12:06 31