Emerson Radio ES920 User Manual
Page 26
25
5.) Press the OPEN/CLOSE button to close the CD door.
The display will show flashing dashes as
the player reads the Table Of Contents on
the disc.
After reading the disc the display will show
the total tracks and playing time.
Note: The reading time may be even longer if you are using CD-RW
(rewritable) discs. This is normal and not an indication of any problem with
your unit.
6.) Press the
PLAY/PAUSE button to
begin playback.
7.) Adjust the VOLUME and EQ controls as desired.
8.) Playback will continue until all tracks on the disc have been played, then the
player stops and the display shows the total tracks number and playing time on
the disc.
To stop playback at any time, press the STOP button.
9.) If you are finished listening, press the OPEN/CLOSE button to open the CD
door, remove your disc from the player, re-close the door and press the
STANDBY
button to return the system to the Standby (Off) mode.
ES920_102104.p65
21/10/2004, 12:06
25