Magnum Energy ME-MW-W User Manual

Page 15

How can I check the wireless gateway for data reception?

Check for data on http://data.magnumenergy.com, or watch the

yellow LED on the wireless gateway to check for data reception. You

should see the yellow LED faintly fl ash every 30 seconds (see Figure

4-1).

I am a network administrator. How do I adjust network settings?

For most applications you do not need to adjust the network settings.

The wireless gateway will automatically receive its network settings

using DHCP or BOOTP.
If you need to modify any settings, telnet to the device on

port 9999.

What if my wireless gateway cannot connect to the internet?

Unplug the Ethernet cable from the wireless gateway and plug the

cable into your laptop computer. Make sure any wireless and cell phone

network connections are turned off.
Verify that you can reboot your computer, and then use a web browser

to visit http://data.magnumenergy.com/. If you cannot connect,

then the network connection will not work for the gateway. The most

likely problem is a network log-in requirement or a fi rewall that does not

allow outgoing data connections.

What if I still have questions?

Visit www.magnumenergy.com or call the Magnum Energy offi ces at

425-353-8833.

5.0 Troubleshooting