Controls, Operation, Specifications – LW Scientific Pipette Shaker User Manual
Page 2
Controls
•Three position Power Switch: Used to turn the Pipette Shaker on and off. Postitions are ON, OFF, and TIMER.
ON setting runs continuously.
•Red Power light:
Signals the unit is on.
Operation
1.
Place samples on the top of the holder
2.
Turn on the Power switch to ON or TIMER position
Specifications
Speed:
2500 RPM
Power:
110V / 60Hz (220V available)
Height:
158.75mm (6.25 in)
Width:
133.35mm (5.25 in)
Weight:
1.9Kg (4.2 lbs.)
P. 770.270.1394
F. 770.270.2389
865 Marathon Parkway Lawrenceville GA 30046
Notes for Safe Use:
•Do not operate unit in or near water or other liquids.
•Unplug unit before cleaning or repairing.
•Do not use if electrical cord is damaged.
•Replace cord if damaged.