LW Scientific BioVID HD/SD - Manual (Page 2)

Setting Up Your Camera
Take out all components and set them on a secure, clean surface.
Next, take the camera out of the packaging and simply screw onto the C-Mount of your
microscope/stereoscope
Once the camera is firmly mounted and secured onto the microscope, plug one end of the included HDMI
cable into the top of the camera.
Next, plug the 3.5mm tip into the DC INPUT jack.
*DO NOT LEAVE POWER JACK PLUGGED IN FOR EXTENDED PERIODS OF TIME. Unplug jack when camera is not in use.
Insert included SD card straight down into the SD card slot.
Insert tip of Remote Capture Cable into the jack marked “Remote.”
*Using the “Running Lock” feature is not recommended.
2
3
1
4
5
P. 770.270.1394 F. 770.270.2389 865 Marathon Parkway Lawrenceville GA 30046
3
4
6