Bang & Olufsen BeoVision 5 - Manual (Page 31)

31
Fine-tune channels
If necessary, you can fine tune a channel. If
you have both antenna and cable inputs, you
must select the appropriate input before
entering the channel number and starting
fine tuning. In the FINE TUNE menu, you can
also select a sound type, such as mono or
stereo, or select a Second Audio Program
(SAP).
FINE TUNE
RF INPUT ANTENNA
CHANNEL 4
FINE +3
SOUND STEREO
store
What’s on the FINE TUNE menu…
(RF INPUT)
RF INPUT appears on the menu if you connect
cable or antenna to both RF IN sockets on the
BeoVision 5 top connection panel. Choose the
signal type, CABLE or ANT (antenna). You can
distinguish between two separate signals of the
same type – for example, two cable signals – by
selecting CABLE A or CABLE B.
CHANNEL
Enter the number of the channel you wish to
fine tune or adjust.
FINE
Choose this option to fine tune a channel signal
within a range of ± 8.
SOUND
Select STEREO, MONO or SAP. If SAP is selected,
but not currently broadcast, the best available
sound type (usually stereo) is selected.
Even though you store a sound type, mono, stereo
or SAP, you can still make temporary changes to
the sound type with Beo4. Please refer to ‘Select
sound type’ on page 21.