Bang & Olufsen BeoVision 5 - Manual (Page 23)

23
Switch on the Timer play function
You must activate the Timer play function in
order for your timers to be executed.
TV SETUP
1 SOUND
2 PICTURE
3 STAND POSITIONS
4 CLOSED CAPTIONING
5 PARENTAL CONTROL
6 RECORD LOCK
7 EXTERNAL SOURCES
8 FIRST TIME SETUP
9 RF / CHANNEL SETUP
10 TIMER PLAY
select
TIMER PLAY
TIMER PLAY ON
store
While BeoVision 5 is on…
> Press MENU on Beo4 to call up the main menu.
> Press 9 to call up the TIMER PLAY menu (10 if
your BeoVision 5 is equipped with a motorised
stand).
> Press ss or tt to reveal ON. To switch off the
Timer play, select OFF instead.
> Press GO to store the setting, or EXIT to leave
the menu.
If your BeoVision 5 is integrated with
a Bang & Olufsen audio system with
a Master Link cable, you can – via
this system – make BeoVision 5 start
or stop automatically on a specific
date and time, or at the same time
and day every week.
Switch on the Timer play function on
BeoVision 5. You can then program
the timed settings on the connected
audio system. The programmed
source, such as CD or radio, is then
played through the BeoVision 5
loudspeakers and switched off at the
appointed times.
Refer to the Guide enclosed with
your audio system for further
information about how to program
timed settings.
Make BeoVision 5 start or stop at a specific time