Bang & Olufsen BeoVision 5 - Manual (Page 14)

14
TV recording from the VCR
The channels you wish to record must be
stored in the VCR tuner, as well as in the
BeoVision 5 tuner. The recording is controlled
by the VCR. For further information about
recording, please refer to the VCR’s own user’s
guide.
Press to switch on the VCR
Pause the VCR, if necessary
Press to be able to start a
recording
Press to start recording. RECORD
is shown on the screen
During recording you can…
…switch BeoVision 5 to standby.
The recording continues
Return to the recording
Press to stop the recording
To ensure that recording takes place, remember to
set the input selector correctly on the VCR.
Record lock a source
You can lock the VCR on to the source you
want to record from, and in this way ensure
that there is a signal between BeoVision 5 and
your VCR. This is useful when you preset a
timed recording via a set-top box or other
equipment connected to the V AUX sockets
on BeoVision 5.
TV SETUP
1 SOUND
2 PICTURE
3 STAND POSITIONS
4 CLOSED CAPTIONING
5 PARENTAL CONTROL
6 RECORD LOCK
7 EXTERNAL SOURCES
8 FIRST TIME SETUP
9 RF / CHANNEL SETUP
10 TIMER PLAY
select
RECORD LOCK
SOURCE LOCKED SAT
store
V TAPE
STOP
RECORD
RECORD
RECORD
•
V TAPE
STOP
>> Use a VCR via Beo4 – recording
> Press MENU to call up the main TV SETUP
menu.
> Press 5 to call up the RECORD LOCK menu (6 if
your BeoVision 5 is equipped with a motorised
stand).
> Use ss tt to select which source to lock – only
available sources will appear.
> Press GO to store the source or input you have
chosen.
> Press EXIT or a source button, such as TV or
SAT, to leave all menus, or press STOP to back
up through previous menus.