Bang & Olufsen BeoVision 5 - Manual (Page 11)

11
Turn the TV to the left or right
If your BeoVision 5 is equipped with a
motorised stand, you can turn the television
to the left or right with the Beo4 remote
control. When you switch the system on and
off, then it automatically returns to a preset
position which can be adjusted via the
on-screen menu system.
Press LIST until STAND is
displayed on Beo4
Turn your BeoVision 5 to the left
or right
Press 1 – 9 to make BeoVision 5
turn to a particular position –
1 is the outermost left and 9 is
the outermost right position
Selected functions for TV or SAT
Use the Beo4 remote control to operate
selected functions via menu overlays. Each
menu overlay is not explained in detail. The
operations described below apply to all
receivers or cable boxes, but the functions
activated will vary.
Press TV until the correct source
is selected, or…
…press SAT to call up your
Satellite channels
Call up the menu overlay for the
selected source
Press a coloured button on Beo4
to activate a function shown in
the menu overlay
Press the number keys to activate
a numbered function or service
in the menu overlay
In menus or services…
Move the cursor in the desired
direction or to the desired option
Use the number keys to enter
information in menus or services
when relevant
Select an option in a menu
Return to watching television
Switch the system to standby
LIST
STAND
ss tt
1 – 9
TV
TV STB
SAT
SAT
MENU
0 – 9
▲
▼
ss tt
0 – 9
GO
EXIT
•
GUIDE
FAV
INFO
PREV CH
MOVIES
SPORTS
NEWS
ALL
MENU
LIST
SERVICES
1
2
3
4
5
6
7
The menu overlay above is from a digital Satellite
receiver and shows the functions and services
available*. With the overlay on the screen, you
can use your Beo4 remote control to operate the
functions shown in the menu. The functions you
activate via the coloured Beo4 buttons are
available directly, without calling up the menu
overlay first. Press MENU a second time to call up
the BeoVision 5 main setup menu.
*NOTE! For detailed instruction in the various
functions offered by your set-top box or Satellite
receiver, please refer to the user’s guide enclosed
with the product or box in question.
To make BeoVision 5 turn to specific positions
when it is switched on or switched to standby,
stand positions for on and standby must be preset.
Use the STAND POSITIONS menu. Refer to ‘Preset
stand positions for BeoVision 5’ on page 32 for
further information.