Connection panels – beovision 10-40/46 – Bang & Olufsen BeoVision 10 Getting Started User Manual

Page 17

tio

~ – Mains supply

Connection to the mains supply. 

AV (1–2 and 4) 
21-pin sockets for connection of additional video 

equipment, such as a DVD player, set-top box, a 
decoder or video recorder. 

PUC (1–4) 
For IR control signals to external equipment 
connected to an AV socket. 

SPDIF (1–2) 
Digital audio input socket, e.g. DVD player. You 
can use the socket in conjunction with an AV 
socket. 

HDMI IN (A, B and C) 
For High Definition Multimedia Interface video 
source or PC. The sources can be registered to any 
of the AV socket groups. To expand the number 
of HDMI sockets, connect an HDMI Expander/
Matrix to the HDMI C socket.

POWER LINK (FRONT – REAR) 
Use for connection of external loudspeakers in a 
surround sound setup. See the Guide for further 
information. 

POWER LINK (SUB)
Use for connection of a Bang & Olufsen subwoofer. 

RF OUT
Not for use.

MASTER LINK
For a compatible Bang & Olufsen audio or video 
system. 

STAND
For connection of a motorised stand. 

AERIAL

Not for use.

Y – Pb – Pr (AV2–4, 6) 

For video signals from an external source,  
e.g. HDTV source. You can use the socket in 
conjunction with an AV socket or a digital audio 
socket.

AV3 (video, L, R) 

For audio connection (right and left sound 
channel respectively) and video signals from an 
external source. 

VGA (AV3) 

For connection of a PC to receive analogue 
graphics.

Connect stereo headphones. 

Note: Prolonged listening at high volume levels
can cause hearing damage!

CAMERA (R, L, video, AV5) 

For audio connection (right and left sound 
channel respectively) and video signals from an 
external source. 

Mains cord and plug

Use a camera or headphones

Connect the ~ socket on the main connection panel of your TV to the wall outlet. The TV is in standby mode and 
ready to be used.
See the Guide for information about use of camera and headphones. 

Connection panels – BeoVision 10-40/46

Any equipment you connect to the main connection panel must be registered in 
the CONNECTIONS menu.  

CAMERA

Mains supply