Bang & Olufsen BeoVision 10 Getting Started - Manual (Page 16)

Connection panels – BeoVision 10-32
Any equipment you connect to the main connection panel must be registered in
the CONNECTIONS menu.
Useful hints
HDMI IN (A, B and C)
For High Definition Multimedia Interface video
source or PC. The sources can be registered to any
of the AV socket groups. To expand the number
of HDMI sockets, connect an HDMI Expander/
Matrix to the HDMI C socket.
SPDIF (1–2)
Digital audio input socket, e.g. DVD player. You can
use the socket in conjunction with an AV socket or
HDMI socket.
PUC (1–4)
For IR control signals to external equipment
connected to an AV socket.
AV1, AV2
21-pin sockets for connection of additional video
equipment, such as a DVD player, set-top box,
a decoder or video recorder.
POWER LINK
Sockets for connection of a Bang & Olufsen
subwoofer and/or external loudspeakers. See the
Guide for further information.
VGA (AV3)
For connection of a PC to receive analogue
graphics.
AV 3 (R, L, video)
For audio connection (right and left sound
channel respectively) and video signals from an
external source.
Y – Pb – Pr (AV2–AV4, AV6)
For video signals from an external source, e.g. HDTV
source. You can use the socket in conjunction
with an AV socket or a digital audio socket.
AERIAL
Not for use.
STAND
For connection of a motorised stand.
AV4
21-pin sockets for connection of additional video
equipment, such as a DVD player, set-top box, a
decoder or video recorder.
MASTER LINK
For a compatible Bang & Olufsen audio or video
system.
RF OUT
Not for use.
~ – Mains supply
Connection to the mains supply.
Power Saving
Camera/headphone sockets
If POWER SAVING is set to ON in the STANDBY SETTINGS menu and the TV is in standby, the sockets AV4 and
MASTERLINK are deactivated. This means that you cannot access the TV from your link room audio or video system,
while the main room TV is in standby. Furthermore, it is not possible to make recordings on sources connected to
AV4. See the Guide for further information.
See the Guide for placement and use of the camera and headphone sockets on BeoVision 10-32.
16
Mains supply