Bang & Olufsen BeoVision 10 Getting Started - Manual (Page 15)

In
st
al
la
tio
n
an
d
se
tt
in
g
up
Run cables
You can fasten the cables to either side or in the
middle, depending on wall bracket or stand
placement.
Overview
If you have a motorised stand, make sure that
there is enough slack in the cables to allow the
TV to turn to either side before you fasten the
cables with cable strips to make a neat bundle.
Fasten the speaker cover
Locate the connection panel and other important
items:
When the TV is placed on a wall bracket or stand
you can attach the speaker cover.
Hold the speaker cover with both hands and
attach it at the bottom first. Then carefully attach
it to the top and adjust its position before letting go. During cleaning it is recommended to remove the
speaker cover. Avoid spraying liquid directly on
the screen as this may damage the speakers, use a
soft cloth instead.
Carefully remove the speaker cover by supporting
it in the side and at the bottom.
1 Mounting bracket for wall bracket.
2 Mounting bracket for stand.
3 Cover for the connection panel. Here you also
find the mains supply connection. Pull out at
the bottom to remove the cover.
4 Depending on your setup lead the cables
through one of the three holes. Remove the
part of the cover using a pair of tongs.
Maintenance
Screen
Cabinet and controls
Never alcohol
Regular maintenance, such as cleaning, is the responsibility of the user.
Use a mild window cleaning fluid and lightly clean the screen without leaving streaks or traces. Some micro-fibre cloths
may harm the optical coating due to their strong abrasive effect.
Wipe dust off the surfaces using a dry, soft cloth. To remove stains or dirt, use a soft, damp cloth and a solution of water
and mild detergent, such as washing-up liquid.
Never use alcohol or other solvents to clean any parts of the TV.
Cleaning
15