Lanner LEC-7110 - Manual (Page 18)

18
Hardware Setup
Chapter 4
Embedded and Industrial Computing
Wall Mounting
The product ships with wall mounting kit. To mount your
product on the wall, follow the instructions below:
First make a hole for the anchor in the surface on the 1.
wall.
Then press the anchor into the hole until it is flush with
2.
the surface. You may need a hammer to tap the wall
anchor.
Use a screwdriver to screw the threaded screw into the
3.
plastic anchor.
Attach the wall mounting bracket to the back of the
4.
device, securing it in place with four of the flat-head
screws provided.
Hang the device on the wall.
5.
Installing the 3G SIM Card
Open the SIM tray by inserting the tip of a pointy object 1.
(or a small paper clip) into the SIM eject lever.
Press firmly and push it straight in until the tray pops 2.
out.
Pull out the SIM tray and place the SIM card in the tray. 3.
The angled corner of the SIM ensures that the card fits
only the correct way in the tray.
With the tray aligned as shown, carefully replace the
4.
SIM tray containing the SIM card in the system.
Installing the Wireless 3G module
Align the wireless module’s key with the Mini-PCIe slot 1.
notch.
Insert the wireless module into the connector
2.
diagonally.
Fasten the wireless module to the board with the
3.
screws (Use the Mini-PCIe module screws contained
within the package).
Unit: mm
Insert
diagonally
Fasten with
screws