Yaskawa SmartTrac Ethernet Card - Manual (Page 7)

SMART TRAC Ethernet Card
Technical Manual Smart Trac Ethernet Card Smart Trac Ethernet Card
••
5
Smart Trac Ethernet Card
General Capabilities
With the Smart Trac Ethernet Card in your Smart Trac AC1, your system is
fully compatible with the IEEE 802.3 Ethernet standard, the most widely used
local area network (LAN) standard. The card provides a fast, reliable, PC-based
interface to the Smart Trac AC1. As an alternative to a serial RS-232
connection, a Smart Trac Ethernet card may be used for high speed (10 Mbps)
monitoring, program uploading and downloading, and running diagnostics.
Smart Trac AC1 on an Ethernet
Network
The card also allows quick, easy and inexpensive networking of a Smart Trac
AC1 with PCs, other Smart Trac AC1s, and other industrial devices. Using the
TCP/IP protocol means that your Smart Trac AC1 system may operate as part of
a Local Area Network (LAN) or a Wide Area Network (WAN).
Specifications
•
Hardware and software compatible with Novell NE2000 ISA bus
Ethernet adapter and PC/104 standard
•
Complies with the 802.3 CSMA/CD Ethernet standard for 10 Mbps
data transfer.
•
Built-in 10Base-T transceiver for unsheilded, twisted pair cabling up to
100 meters in length. Optional 10Base2 transceiver module. AUI
connector for external 10Base5 transceiver
•
Single +5V power supply at 400 milliamp maximum without external
transceiver).
•
Two diagnostic LEDs
•
On-board 32K memory provides a high-performance, multi-package
buffer.
•
Operating Temperature: 0° C to 70° C
•
Operating Humidity: 10% to 90%