Yaskawa V1000 Option DeviceNet - Manual (Page 19)

5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 28B V1000 Option DeviceNet Installation Manual 19
◆
Wiring Diagram
Figure 5 Wiring Diagram
◆
Prior to Installing the Option Unit
Prior to installing the DeviceNet Option, wire the drive and make necessary connections to
the drive terminals. Refer to the Quick Start Guide for information on wiring and connecting
the drive. Verify that the drive functions normally prior to installing the Option.
Properly connect all pins and connectors.
Failure to comply may prevent proper operation and possibly damage equipment.
Check wiring to ensure that all connections are correct after installing the option
unit and connecting any other devices.
Failure to comply may result in damage to the option unit.
<1> The FE terminal on the DeviceNet Option is supplied with a ground cable that should be connected to the ground
terminal on the drive.
NOTICE
V1000
SI-N3/V
M
U
V
W
R
V+
V-
CAN_H
CAN_L
Shield
S
T
CN5
FE
<1>
DeviceNet Master
or
drop line
DeviceNet Cable
Motor Power
㧔Red㧕
㧔Black㧕
㧔White㧕
㧔Blue㧕