Yaskawa V1000 Option DeviceNet - Manual (Page 11)

YASKAWA ELECTRIC TOBP C730600 28B V1000 Option DeviceNet Installation Manual 11
3 Receiving
3 Receiving
Please perform the following tasks after receiving the DeviceNet Option:
• Inspect the DeviceNet Option for damage.
If the DeviceNet Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the nameplate (see
Figure 1).
• If you have received the wrong model or the DeviceNet Option does not function
properly, contact your supplier.
◆
Contents and Packaging
Table 2 Contents of Package
◆
Tool Requirements
Note: Tools required to prepare DeviceNet cables for wiring are not listed in this manual.
Description: Option Unit Ground Cables Warning Labels
Installation
Manual
_
Quantity: 1 4 1 1
A Phillips screwdriver (M3, M3.5 to M6
<1>
) metric or (#1, #2
<1>
) U.S. standard size is
required to install the DeviceNet Option.
<1> Screw sizes vary by drive model. Select the appropriate screwdriver.
MANUAL