beautypg.com

Hardware, Start-up, Mounting orientation – Yaskawa SMCGUI-THK1 User Manual

Page 25: Start-up mounting orientation, Hardware start-up

background image

21

Hardware

Start-up

Mounting the LEGEND-MC to the LEGEND Amplifier

1.

Insert the lower two mounting notches of the LEGEND-MC
into the mounting holes at the bottom of the right side of the
LEGEND.

2.

Push the LEGEND-MC in the direction indicated by the
arrow in the figure below, and insert the upper mounting
notches of the LEGEND-MC into the upper mounting holes
on the right side of the LEGEND.

Mounting Orientation

Mount the LEGEND-MC and LEGEND vertically for proper
cooling, as shown below. Allow a minimum spacing of 10mm
around the left and right sides and 30mm around the top and bottom
of the LEGEND-MC/LEGEND unit.

See also other documents in the category Yaskawa Equipment: