Yaskawa PG-E3 Motor Encoder Feedback - Manual (Page 13)

5 Installation Procedure
12 YASKAWA ELECTRIC TOBP C730600 52C 1000-Series Option PG-E3 Installation Manual
2.
Insert the option (B) into the CN5-C (L) connector located on the drive and fasten it
into place using one of the included screws (C).
Connect the ground wire (H) to the ground terminal (I) using one of the remaining
screws (C). Connect the other end of the ground wire (H) to the remaining ground
terminal and installation hole on the option using the last remaining provided screw
(C).
Figure 4
Figure 4 Insert the Option and Connect the Ground Wire
Note: There are two screw holes on the drive for use as ground terminals. When connecting three
options, two ground wires will need to share the same drive ground terminal.
I
K
L
A
B
C
H