3 receiving, Option package contents, Tools required for installation – Yaskawa 1000 Series Drive Option - Open Collector Type PG User Manual
Page 9: 3receiving

YASKAWA ELECTRIC TOBP C730600 36C 1000-Series Option PG-B3 Installation Manual
9
3 Receiving
3
Receiving
Please perform the following tasks upon receiving the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears
damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the option
on page
for more information).
• Contact your supplier if you have received the wrong model or the option does not
function properly.
◆
Option Package Contents
◆
Tools Required for Installation
• A Phillips screwdriver (M3 metric / #1, #2 U.S. standard size) is required to install the
option.
• A straight-edge screwdriver (blade depth: 0.4 mm, width: 2.5 mm) is required to wire the
option terminal block.
• A pair of diagonal cutting pliers.
• A small file or medium-grit sandpaper.
Note: Tools required to prepare option cables for wiring are not listed in this manual.
Description:
Option
Ground Wires
Screws (M3)
Installation Manual
–
Quantity:
1
2
3
1
B3
B3
MANUAL