Yaskawa 1000 Series Drive Option - Digital Output Installation - Manual (Page 21)

5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 41F 1000-Series Option DO-A3 Installation Manual 21
6.
Route the option wiring.
Depending on the unit model, some units may require routing the wiring through the
side of the front cover to the outside. In these cases, cut out the perforated openings
on the left side of the unit front cover as shown in Figure 9 -A and leave no sharp
edges to damage wiring.
Route the wiring inside the enclosure as shown in Figure 9 -B for units that do not
require routing through the front cover.
Refer to the Peripheral Devices & Options section of the unit Instruction Manual for
more information.
Figure 9
Figure 9 Wire Routing Examples
A B