Yaskawa 1000 Series Drive Option - Digital Output Installation - Manual (Page 19)

5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 41F 1000-Series Option DO-A3 Installation Manual 19
Wire Gauges and Tightening Torques
Wire gauge and torque specifications are listed in Table 2 .
Table 2 Wire Gauges and Tightening Torques
Ferrule-Type Terminals
Yaskawa recommends using CRIMPFOX 6 by Phoenix Contact or equivalent
ferrule-type terminals with the specifications listed in Table 4 for wiring to ensure
proper connections.
Note: Properly trim wire ends so loose wire ends do not extend from the crimp terminals.
Table 3 Ferrule-Type Terminal Sizes
Terminal
signal
Screw
Size
Tightening
Torque
Nxm (inxlb)
Bare Cable Ferrule-Type Terminals
Wire
Type
Recomm.
Gauge mm 2
Applicable
Gauges mm 2
Recomm.
Gauge mm 2
Applicable
Gauges mm 2
P1 to P6,
PC
M2
0.22 to 0.25
(1.95 to 2.21)
0.75
(18 AWG)
Stranded wire:
0.25 to 1.0
(24 to 17 AWG)
Solid wire:
0.25 to 1.5
(24 to 16 AWG) 0.5
(20 AWG)
0.25 to 0.5
(24 to 20 AWG)
Shielded
twisted
pair, etc.
M1 to M4 M3
0.5 to 0.6
(4.43 to 5.31)
Stranded wire:
0.25 to 1.5
(24 to 16 AWG)
Solid wire:
0.25 to 2.5
(24 to 13 AWG)
0.25 to 1.0
(24 to 17 AWG)
Ferrule-Type
Terminal
Wire Gauge
mm 2
Phoenix Contact
Model
L
mm (in)
d1
mm (in)
d2
mm (in)
0.25 (24 AWG) AI 0.25 - 6YE 10.5 (13/32) 0.8 (1/32) 2 (5/64)
0.34 (22 AWG) AI 0.34 - 6TQ 10.5 (13/32) 0.8 (1/32) 2 (5/64)
0.5 (20 AWG) AI 0.5 - 6WH 14 (9/16) 1.1 (3/64) 2.5 (3/32)
d1 d2
6 mm
L