SMA SC 250U - Manual (Page 26)

Spot Values SMA America, LLC
26 SCUS-BE-BUS120514 User Manual
5 Spot Values
The following table shows the spot values that are visible to the user. The spot values are part of the
channel list and display the Sunny Central‘s status.
Name Description
Cntry Country code
Dsc Error description
ErrNo Display of error number
Error Identification of the error „Photovoltaic“, „Inverter“ or „Grid“
E-heute Energy generated today
E-Total Total amount of energy fed into the grid.
Fac AC frequency
Firmware Firmware version of the operation control unit (BFR)
Firmware-2 Firmware version of the digital signal processor (DSP)
Firmware-3 Operation control unit boot loader
Firmware-4 Digital signal processor boot loader
Firmware-5 Version of I/O-unit
GdCtcStt Display of a symbol indicating whether the Sunny Central is feeding into the grid.
h-On h-on indicates how long sufficient DC voltage has been applied to the Sunny Central
and the Sunny Central has been active including the time it was not able to feed to
the utility with respect to low DC voltage or operation in stop mode.
h-Total Total number of grid-feeding operational hours
Iac AC current (active current)
Ipv DC current
Mode Display of the current operating mode.
Msg Message
The display indicates how to proceed.
Pac Generated AC power
Ppv DC power
Prio Priority
The following appears on the display:
• Wrench (the Sunny WebBox shows plain text message „Prio_B“):
In section 7 ”Error Diagnosis” (page 31) it is described how this error can be
rectified.
or
• Telephone receiver (the Sunny WebBox shows plain text message „Prio_A“):
Contact the SMA Serviceline, see section 8 ”Contact” (page 39).
Qac AC reactive power