SMA BEAM-AW15 - Manual (Page 32)

Basic Information on Radio Transfer SMA Solar Technology AG
32 BEAMAW-BXX073022
2.2 External Antenna Kit
The external antenna kit can be installed horizontally and vertically, which allows the antenna
position to be adjusted for local conditions.
From storey to storey with an external antenna
If you have very absorbent walls or ceilings in your building which impair the radio connection
between the inverter and the Sunny Beam, you can circumvent this problem using the external
antenna and antenna bracket. Simply lay the antenna cable through a wall or ceiling and mount
the antenna bracket on the other side. The antenna bracket must then be mounted horizontally as
shown in the figure.
The external antenna is not suitable for mounting outdoors!
outside the reception range
or in the dead spot
External antenna kit
(with antenna bracket and
Antenna extension cable)