SMA BEAM-AW15 - Manual (Page 25)

SMA Solar Technology AG Installation of the external Antenna Kit
BEAMAW-BXX073022 25
Install antenna bracket
3. Remove the protective foil from the antenna bracket.
4. Secure the antenna bracket with screws in a suitable position relative to the inverter. See
chapter 2.2 External Antenna Kit on the advantages of horizontal or vertical mounting.
5. Place the washer on the external thread of the antenna cable and insert the external thread
through the slit in the antenna bracket.
6. Screw the antenna tip to the external thread of the antenna cable from the other side of the
antenna bracket.
Avoid major kinking in the antenna cable.
Antenna bracket
Antenna tip
Washer