SMA BEAM-AW15 - Manual (Page 27)

SMA Solar Technology AG Installation of the external Antenna Kit
BEAMAW-BXX073022 27
5. Unscrew the antenna tip and remove the threaded sleeve and the sealing ring from the
antenna cable. The antenna cable and the antenna spring are no longer required.
Install antenna extension cable
You need the parts shown in the figure to install the external antenna.
The parts of the old antenna in the dotted box (see figure above) are now mounted to the cable of
the external antenna.
6. Remove the rubber from the sealing ring.
Threaded sleeve
PG screw fitting
Antenna tip
Sealing ring
Antenna spring
Antenna extension cable
Rubber ring
Washer Antenna bracket
Antenna tip
Threaded sleeve
Sealing ring
Sealing ring
Rubber