SMA BEAM-AW15 - Manual (Page 20)

Installation of the external Antenna Kit SMA Solar Technology AG
20 BEAMAW-BXX073022
1 Installation of the external Antenna Kit
1.
The external antenna kit allows you to improve the antenna alignment, if you are unable to install
the inverter and Sunny Beam in an optimal position. If necessary, walls or a ceiling can be bridged.
If this is the case, lay the antenna cable through the wall or ceiling and mount the antenna bracket
on the other side.
DANGER!
Lethal danger caused by high voltages in the inverter.
• All work on the inverter must be carried out by a qualified electrician.
The external antenna is not suitable for mounting outdoors!
Use only the antenna bracket provided by SMA as antenna bracket.
The distance between the antennas must be at least 3 antenna lengths (approx. 30 cm).