1 retrofitting for initial situation (a), Retrofitting for initial situation (a) – SMA BEAM-AW15 User Manual
Page 22
Installation of the external Antenna Kit
SMA Solar Technology AG
22
BEAMAW-BXX073022
1.1 Retrofitting for initial Situation (A)
This section refers solely to initial situation (A). For the different initial situations, please refer to
section “Installation of the external Antenna Kit" on page 20.
Fasten antenna extension cable
1.
Unscrew the antenna tip from the inverter housing. It will
still be required later.
2.
Remove the sealing from the thread of the antenna.
3.
Screw the antenna extension cable to the
thread of the antenna on the inverter
housing.
This manual is related to the following products: