SMA TCS 500-SC - Manual (Page 15)

SMA Solar Technology AG 6 Transport and Installation
Installation Manual TCS-IT-IEN103610 15
6 Transport and Installation
Figure 5: Lifting holes for lifting spreader on the front and back
8"3/*/(
Crush hazard: The Transformer Compact Station may tip over if not transported
properly.
The Transformer Compact Station's center of gravity is not in the middle of the device.
• The means of transportation must be designed for a 17 t load.
• Do not tip the Transformer Compact Station during transportation.
• Transport the Transformer Compact Station as low to the ground as possible.
• Always use all lifting holes when transporting the device.
• Avoid sudden, jerky movements during transportation.
/05*$&
Transporting the device without transport locks on the medium-voltage transformer may
damage the medium-voltage transformer.
• Do not remove the transport locks on the medium-voltage transformer.
/05*$&
Moisture penetration may damage the Transformer Compact Station.
• Transport and store the Transformer Compact Station with its doors closed only.
Position Description
A Lifting holes for spreader
A
SMA SMA
A A A