SMA POWER CONTROL MODULE - Manual (Page 22)

7 Decommissioning SMA Solar Technology AG
22 PWCBRD-10-IA-en-14 Installation Manual
5. Loosen the screw M4x10 fastening the module to
the inverter using a Torx screwdriver (T 20).
6. Remove the module from the inverter. The spacers
remain in the inverter.
7. Close the inverter and recommission it (see the inverter installation manual).
7.2 Packing the Module for Shipment
• Pack the module for shipment. Use the original packaging or packaging that is suitable for the
weight and size of the module (see Section 8 "Technical Data", page 23).
7.3 Disposing of the Module
• Dispose of the module in accordance with the disposal regulations for electronic waste
applicable at the installation site.