SMA SSM8-21-BS - Manual (Page 20)

5 Mounting SMA Solar Technology AG
20 SSMxx-21-IA-BS-JP-en-20 Installation Manual
5. Fasten the Sunny String-Monitor to the wall or stand using suitable
screws and washers.
6. Ensure that the Sunny String-Monitor is securely in place.
5.2 Base Mounting
The base for the Sunny String-Monitor is available as an accessory.
5.2.1 Selecting the Mounting Location
Requirements for the mounting location:
☐ The mounting location must not be in a living or office area.
☐ The mounting location must not block any escape routes.
☐ The mounting location must be freely and safely accessible at all times without the necessity for any auxiliary
equipment (such as scaffolding or lifting platforms). Non-fulfillment of these criteria may restrict servicing.
☐ The mounting location must be suitable for the weight and dimensions of the Sunny String-Monitor (see Section 12
"Technical Data", page 51).
☐ The mounting location must not be exposed to direct solar irradiation.
5.2.2 Mounting the Base
'$1*(5
Danger to life due to fire or explosion
• Do not mount the Sunny String-Monitor on flammable construction materials.
• Do not mount the Sunny String-Monitor near highly flammable materials.
• Do not mount the Sunny String-Monitor in potentially explosive atmospheres.
/05*$&
Damage to the Sunny String-Monitor due to moisture penetration
Penetrating moisture can lead to condensation, corrosion and creeping currents. The use of a base filler will prevent the
formation of condensation.
• Use a base filler when installing the base.