ShoreLand'r SRV24 V.1 - Manual (Page 8)

AXLE
See Detail B, page 2.
Place one of the spring bracket bushings into
the rear of the spring bracket and secure with
a 9/16” x 3-1/4” hex bolt and hex lock nut.
Repeat in other spring bracket.
Position the axle under the frame, then hook
the hook end of the spring around the
bushings just installed. Note that if the axle is
positioned too low when trying to hook, the
hooks will not hook around the bushings.
Raise the front of the springs up so they align
with the front hole of the spring bracket.
Secure in place with 9/16” x 3-1/4” hex bolts
and lock nuts. Tighten all spring bolts at this
time.
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com M301236
Page 8 of 12