ShoreLand'r SL82TAL - Manual (Page 5)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003356
REV G 4/28/06
Page 5
Winch Post Assembly
Mount the winch post assembly to the tongue at a loca-
tion that best fits your watercraft. Secure the winch post
base weldment (Item #3) to the tongue using two (2) 1/2”
X 3-9/16” X 5” stainless steel square u-bolts (Item #13)
and four (4) 1/2” stainless steel hex lock nuts with nylon
inserts. Mount the winch post angle tube weldment (Item
#4) on the tongue at a height that would best fit your wa-
tercraft using two (2) 1/2” X 3-9/16” X 5” stainless steel
square u-bolt over the flange as shown in the drawing.
Place the legs of the U-bolt into the winch hold down
clamp (Item #7) and secure with four (4) 1/2” stainless
steel hex lock nuts with nylon inserts.
Winch Post: